Whole-home water filtrationfor Melbourne homes.
- Three stages: sediment, catalytic carbon, heavy metal
- Filters every tap, shower and bath in the home
- Installed in 3–4 hours by our licensed plumbers
- 7-year system warranty · 10-year workmanship guarantee
Book by 20 December for summer pricing. From 21 December it’s $4,860.
Send us a photo of your wall. Within 24 hours we’ll show you how it will look on your home. No obligation.
- WaterMark certifiedCheck our licence on the ABCB register
- 7-year system warrantyPlus 10 years on workmanship
- Licensed plumbersOur own team, never subcontracted
- Free install planSee it on your home before you decide
Designed to sit beside the architecture.Not stand out from it.
What happens inside the cover.
Scroll to look inside.
Three stages.
One cover.
Sediment · 1 micron
A 1-micron spun polypropylene cartridge traps rust, dirt, silt and fine particles from the mains, protecting the next two stages and your fixtures.
Catalytic carbon · 0.5 micron
A 0.5-micron catalytic carbon block reduces chlorine and chloramine, the cause of tap water’s chemical taste and smell, along with VOCs.
Heavy metal · 5 micron
A 5-micron heavy-metal carbon stage reduces lead and copper that can leach from older pipes and fittings. Then every tap, shower and bath in the home gets filtered water.
Every tap.
Every room.
Inside the system.Three stages, one cover.
- 01Sediment · 1 micronA 1-micron spun polypropylene cartridge traps rust, dirt, silt and fine particles from the mains, protecting the next two stages and your fixtures.
- 02Catalytic carbon · 0.5 micronA 0.5-micron catalytic carbon block reduces chlorine and chloramine, the cause of tap water’s chemical taste and smell, along with VOCs.
- 03Heavy metal · 5 micronA 5-micron heavy-metal carbon stage reduces lead and copper that can leach from older pipes and fittings. Then every tap, shower and bath in the home gets filtered water.
Specifications
- Stages
- 1 µm sediment · 0.5 µm catalytic carbon · 5 µm heavy-metal carbon
- Housings
- 20″ × 4.5″ high-flow
- Flow rate
- Up to 50 L/min
- Connection
- 25 mm (1″) inlet and outlet
- Cover
- Matte black powder-coated steel, weatherproof
- Gauges
- One pressure gauge per stage
- Certification
- WaterMark certified
- Cartridge life
- 12 months (6-month sediment check in high-use homes)
What’s in Melbourne’s water?And what we take out.
Melbourne’s water starts in protected catchments in the Yarra Ranges and is safe to drink. What reaches your tap also picks up chlorine, sediment from the mains and whatever is in your home’s pipes.
Chlorine
Melbourne disinfects its water with chlorine. It’s safe, but you can taste and smell it, especially in the western and growth suburbs, where levels run higher.
Sediment & discoloured water
Mains works and bursts across Melbourne can stir up silt and rust and send brown water to your taps. Stage one catches it before it reaches the house.
Lead from older plumbing
Melbourne’s mains water is low in lead. The risk is inside older homes: period and pre-1980 houses can have lead solder and brass fittings. Stage three targets it.
Taste & odour
Melbourne starts with some of Australia’s best water. Take out the chlorine and you taste the difference in coffee, tea and ice.
Cleaner water in every part of your home.One system, installed where water enters.
Kitchen
Clean water for drinking, cooking, coffee and ice, with no under-sink unit to fit.
Shower & bath
Less chlorine on your skin and hair, and no chlorine smell in the steam.
Laundry
Softer feel on linen and towels, and less sediment reaching your appliances.
Garden & outdoor
Every outdoor tap is covered too, so the whole property gets the same water.
The filter catches what you can’t see.Up close: the same sediment cartridge, new and after 12 months.
Day 1Day 365Drag to compare. That’s what would otherwise end up in your pipes, appliances and glass. Industry guidance is to change cartridges every 6 to 12 months. With Clean Care we replace all three every 12 months, and check the sediment stage at 6 months in busy homes.
Not all solutions are built the same.Why whole-home filtration.
| Feature | clean whole-home | Under-sink filter | Jug or tap filter | Bottled water |
|---|---|---|---|---|
| Treats every tap in the home | — | — | — | |
| Filters shower & bath water | — | — | — | |
| Hidden from view | — | — | ||
| No single-use plastic | — | |||
| Professional install & servicing | Sometimes | — | — | |
| Nothing to refill day to day | — | — |
Three steps to cleaner water.We handle all of it.
Free install plan
Send a photo of your wall. Within 24 hours we send a mockup on your home, the right size and your fixed price, then call to lock in a date.
Professional install
Our licensed plumbers fit it where water enters the home in 3–4 hours. Your water is off for about 20 minutes.
Clean Care aftercare
We remind you, book it, and replace all three cartridges each year. You never have to think about it.
Peace of mind, in writing.Six promises with every install.
A whole-home system is a long-term investment in your house. These promises come on top of your rights under Australian Consumer Law.
- 7 yrs
System warranty
Housings, cover, gauges and fittings covered against defects for seven years.
- 10 yrs
Workmanship guarantee
If our installation ever develops a fault in the first ten years, we fix it at no cost.
- 24h
Free install plan
A mockup on your wall, your size and your fixed price, before you commit to anything.
- Fixed
Price, fully installed
The price we quote is the price you pay. No surprises on the day.
- 60 days
Love it or we’ll make it right
Not happy in the first 60 days? We’ll fix it, or remove the system and refund you.
- Annual
Clean Care service
We remind you, book it, replace all three cartridges and pressure-test the system.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full warranty terms
Certified for Australian homes.Every claim backed by a number you can check.
- WaterMark
WaterMark certified
Australia’s mandatory certification for plumbing products. Our licence number is on every install certificate.
Licence WMK[XXXXX] · check the ABCB register - AS 3497
AS 3497:2021
The Australian Standard for the design and performance of drinking water treatment systems.
- NSF/ANSI
Performance-tested cartridges
Chlorine reduction tested to NSF/ANSI 42, so our claims are backed by independent lab data.
- VIC
Licensed & insured
Licensed Victorian plumbers, $20M public liability, and a compliance certificate with every install.
Know your water.Straight answers for Melbourne homes.
- Melbourne waterComing soon
Is Melbourne tap water safe to drink?
- Health & homeComing soon
Why your shower smells of chlorine, and what to do about it
- Period homesComing soon
Lead in older Melbourne homes: what to check
See it on your homebefore you decide.
Questions, answered.
On an exterior wall where the mains water enters your home, inside its weatherproof matte black cover. It suits freestanding houses and townhouses with accessible mains.
Our 20-inch high-flow housings are rated to around 50 litres a minute, more than a typical home uses even with several showers running. A gauge on each stage lets us check pressure at every service.
Every 12 months as standard, in line with industry guidance of 6 to 12 months. Larger households, or areas with frequent mains works, may need the sediment cartridge changed at 6 months. Clean Care customers have this booked and done for them.
Yes. Melbourne’s water comes from protected catchments and meets the Australian Drinking Water Guidelines. Filtration is about taste, smell and what your own pipes add, not making unsafe water safe.
No. Carbon filtration doesn’t remove fluoride, and we don’t claim PFAS removal. PFAS hasn’t been detected in Melbourne’s supply network. We’ll always tell you exactly what our system does and doesn’t do.
Clean Care is $349 a year and covers all three cartridges, the service visit and a pressure check. Your first year is free with installation.
Both. For new builds we work with your builder or architect at the plans stage so the mains and cover location are planned in.